No Ip Echo-Reply - Siemens SCALANCE W760 Configuration Manual

Network protocols
7.1 IPv4 protocol
Syntax
Call the command without parameters:
ip echo-reply
Result
"ICMP echo reply messages" are enabled.
Further notes
You disable the setting with the
You can display the setting of this function and other information with the
information
7.1.2.4

no ip echo-reply

Description
With this command, you disable the "ICMP echo reply messages".
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameters:
no ip echo-reply
Result
"ICMP echo reply messages" are disabled.
Further notes
You change the setting with the
You can display the setting of this function and other information with the
information
266
no ip echo-reply
command.
ip echo-reply
command.
command.
command.
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
show ip
show ip