Wlan Security Ap-Radius-Authenticator Address - Siemens SCALANCE W760 Configuration Manual
Industrial wireless lan
Hide thumbs
Also See for SCALANCE W760:
- Configuration manual (464 pages) ,
- Operating instructions manual (50 pages) ,
- Operating instructions manual (51 pages)
Table of Contents
Advertisement
Syntax
Call up the command with the following parameters:
no wlan security ap-radius-authenticator <index (1-2)>
The parameter has the following meaning:
Parameters
index
Result
The RADIUS server is disabled.
Further notes
You disable the RADIUS server with the
You display the setting with the
See also
wlan security ap-radius-authenticator (Page 363)
show wlan security ap-radius-authenticator (Access Point) (Page 361)
10.2.4.3
wlan security ap-radius-authenticator address
Description
With this command, you configure the IP address of the RADIUS server.
Note
This command is available only in access point mode.
Requirement
You are in the WLAN Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-wlan)#
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
Description
Index of the RADIUS server
wlan security ap-radius-authenticator
show wlan security ap-radius-authenticator
Security and authentication
10.2 WLAN
Values or range of values
1...2
command.
command.
365
Advertisement
Table of Contents
