Time Dst Recurring - Siemens SCALANCE W760 Configuration Manual

The parameters have the following meaning:
Parameter
name
year
begin
MMDDhh
end
MMDDhh
Result
The entry for the start and end of daylight saving time was created.
5.1.2.4

time dst recurring

Description
With this command, you configure the start and end of daylight saving time with a generic
description.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
time dst recurring <name(16)> begin {<week(1-5)> | last} <weekday> <month> <hour> end
{<week(1-5)> | last} <weekday> <month> <hour>
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
Description
Name of the entry
Year
Keyword for the start of daylight saving
time.
Time for the start of daylight saving
time.
Keyword for the end of daylight saving
time.
Time for the end of daylight saving
time.
System time
5.1 System time setting
Range of values / note
maximum 16 characters
1900 ... 2099
-
Time in the format
Month
MM
Day
DD
Hour
hh
-
Time in the format
Month
MM
Day
DD
Hour
hh
103