Network protocols
7.4 SNMP
Parameter
-
read
write
notify
Storage type
The keywords need to be specified.
If optional parameters are not specified when configuring a group, the default value will be
used.
Result
The settings for access to an SNMP group are configured.
Further notes
You delete the access to an SNMP group with the
You display the configured SNMP groups with the
You display the access configurations for SNMP groups with the
command.
You display the configured SNMP tree views with the
310
Description
Selects the authentication method:
the data can be read
Keyword
the data can be read and written
Keyword
Changes can be set as a tag
Keyword
specifies whether the settings remain
following a restart
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Range of values / note
•
auth
enables MD5 or SHA as au-
thentication method
•
noauth
no authentication
•
priv
enables authentication and
encryption
•
ReadView
•
none
•
WriteView
•
none
•
NotifyView
•
none
•
volatile
The settings are lost after a
restart
•
nonvolatile
The settings are retained after
a restart
command.
no snmp access
command.
show snmp group
show snmp group access
show snmp viewtree
Configuration Manual, 11/2014, C79000-G8976-C351-03
(volatile):
(non-volatile):
command.