Username - Siemens SCALANCE W760 Configuration Manual

Configuration
3.1 System
3.1.9.11

username

Description
With this command, you change the password of a user.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
username {user|admin}password<passwd>
The parameters have the following meaning:
Parameter
user
admin
password
passwd
Note
Length of the password
The password must be at least 6 characters long.
Result
The password is changed.
Note
Changing the password in Trial mode
Even if you change the password in Trial mode, this change is saved immediately.
56
Description
the password for the user is changed
the password for the administrator is changed
Keyword for a password
Value for the password
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03