No Smtp-Port - Siemens SCALANCE W760 Configuration Manual

Network protocols
7.5 SMTP client
7.5.4.6

no smtp-port

Description
With this command, you reset the SMTP port to the default.
The default value is 25.
Requirement
You are in the EVENTS configuration mode.
The command prompt is as follows:
cli(config-events)#
Syntax
Call the command without parameters:
no smtp-port
Result
The SMTP port is reset to the default value.
Further notes
You configure the setting with the
You display the setting with the
336
command.
smtp-port
command.
show smtp-port
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03