Wlan Mode (Client) - Siemens SCALANCE W760 Configuration Manual
Industrial wireless lan
Hide thumbs
Also See for SCALANCE W760:
- Configuration manual (464 pages) ,
- Operating instructions manual (50 pages) ,
- Operating instructions manual (51 pages)
Table of Contents
Advertisement
Network structures
6.1 WLAN
Syntax
Call up the command with the following parameters:
wlan mode { show-modes |<mode>}
The parameter has the following meaning:
Parameters
show-modes
mode
Depending on the current configuration, some settings are not possible. In this case, a
message to this effect is displayed.
Result
The transmission standard is specified.
Further notes
You display the setting with the
6.1.5.44
wlan mode (client)
Description
With this command, you specify the transmission standard.
Note
This command is only available in the client mode.
180
Description
Lists the transmission standards. --
Value corresponding to a specif-
ic transmission standard.
show wlan basic <wlan 0/X>
Values or range of values
•
a
IEEE 802.11a (5 GHz)
•
g
IEEE 802.11g (2.4 GHz)
Is downwards compatible with IEEE 802.11b
•
n
IEEE 802.11n (2.4 GHz + 5 GHz)
Is downwards compatible with IEEE 802.11a
and IEEE 802.11g
•
n-only
IEEE 802.11n (2.4 GHz + 5 GHz)
Is not downwards compatible with IEEE 802.11a
and IEEE 802.11g
command.
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
Advertisement
Table of Contents
