Selecting Quick Setup Mode (G120X/G120Xa Converters Only) - Siemens SINAMICS G120 Operating Instructions Manual

5.2.8

Selecting quick setup mode (G120X/G120XA converters only)

This option is visible only when your SINAMICS G120 Smart Access is connected to
G120X/G120XA converter. Two quick setup modes are available for choice:
• Quick setup for G120X/G120XA (Page 42): used only for the G120X/G120XA converter
• Classic quick setup (Page 35): used for all the converters (SINAMICS G115D and SINAMICS
G120 CU250S-2 converters excluded) supported by the SINAMICS G120 Smart Access but
not recommended for the G120X/G120XA converter
The quick setup menu icon displayed on the home page may vary depending on the currently
active quick setup mode:
SINAMICS G120 Smart Access
Operating Instructions, 12/2020, A5E43332487-004
Quick setup for G120X/G120XA is active.
Classic quick setup is active.
Standard Web pages
5.2 Optional settings page
33