Smtp Client; Show Events Smtp-Server; Show Events Sender Email - Siemens SCALANCE W760 Configuration Manual

Network protocols

7.5 SMTP client

7.5 SMTP client
This section describes commands of the Simple Mail Transfer Protocol (SMTP).
7.5.1

show events smtp-server

Description
This command shows the configured SMTP servers.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show events smtp-server
Result
The configured SMTP servers are displayed.
7.5.2

show events sender email

Description
This command shows the configured e-mail sender address.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show events sender email
330
or
cli#
or
cli#
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03