Mtu - Siemens SCALANCE W760 Configuration Manual
Industrial wireless lan
Hide thumbs
Also See for SCALANCE W760:
- Configuration manual (464 pages) ,
- Operating instructions manual (50 pages) ,
- Operating instructions manual (51 pages)
Table of Contents
Advertisement
Configuration
3.1 System
3.1.10.7
mtu
Description
With this command, you configure the size of the Maximum Transmission Unit (MTU) for an
interface.
Requirement
● The Interface must be shut down.
You are in the Interface configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call up the command with the following parameters:
mtu <frame-size(64-1500)>
The parameter has the following meaning:
Parameter
frame-size
At system start or when using the
following defaults apply:
● The size of the MTU is configured to 1536 bytes.
Result
The setting for the size of the MTU is configured.
Further notes
You can shut down the interface with the
You display this setting with the
You display this setting and other information with the
62
Description
Size of the MTU in bytes
command with the option
restart
shutdown complete
show interface mtu
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
Range of values
64 ... 1500
or
memory
command.
command.
command.
show interfaces
, the
factory
Advertisement
Table of Contents
