Siemens SCALANCE W760 Configuration Manual page 164

Network structures
6.1 WLAN
Syntax
Call up the command with the following parameters:
wlan data rate-11abg {show-rates | {{add | del} <rate> | all | none} [basic]}
The parameters have the following meaning:
Parameters
show-rates
add
del
rate
all
none
basic
Note
You need to assign at least one data transmission speed and one "
interface.
Result
The data transmission speeds are assigned to the WLAN interface.
Further notes
You display the setting with the
You enable the function with the
You configure the transmission standard with the
You can reset the selection to the default setting with the
command.
164
Description
Shows a list of the available data transmission speeds.
The data transmission speed is assigned to the WLAN interface entered
in the < > parameter.
rate
The data transmission speed is removed from the WLAN interface en-
tered in the < > parameter.
rate
Data transmission speed
All available data transmission speeds are assigned to the WLAN inter-
face.
Only the first available data transmission speed is assigned to the
WLAN interface. The other data transmission rates are deselected.
The data transmission speed entered in the <
clared as "Basic".
The " " parameter can only be called in conjunction with the pa-
basic
rameters " ", " ", "
add del all
show wlan data rates
wlan data rates-11abg selected only
wlan mode
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
> parameter is de-
rate
" and " ".
none
" to the WLAN
Basic
command.
command.
command.
wlan data rate-11abg defaults