Send Test Mail - Siemens SCALANCE W760 Configuration Manual

Diagnostics
11.1 Diagnostics
Result
The settings for monitoring the physical network connections have been configured.
Further notes
You can display the current setting with the
You enable the function with the
11.1.14.10

send test mail

Description
With this command, you send an e-mail according to the currently configured SMTP settings.
Requirement
You are in the EVENTS configuration mode.
The command prompt is as follows:
cli(config-events)#
Syntax
Call the command without parameters:
send test mail
Result
An e-mail according to the currently configured SMTP settings is sent.
Further notes
You can display the current SMTP settings with the
422
show events faults config
command.
link
show events smtp-server
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
command.
command.