Wlan Roaming Threshold (Client) - Siemens SCALANCE W760 Configuration Manual

Network structures
6.1 WLAN
Requirement
You are in the Interface Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-if-wlan-0-X)#
Syntax
Call up the command with the following parameters:
wlan overlap-ap aging <min(1-7200)>
The parameter has the following meaning:
Parameters
min
Result
The aging time is specified.
Further notes
You display the setting with the
6.1.5.48

wlan roaming threshold (client)

Description
With this command, you specify the threshold after which the client roams to the new access
point.
Note
This command is only available in the client mode.
Requirement
You are in the Interface Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-if-wlan-0-X)#
184
Description
Time in minutes (min)
show wlan advanced <wlan 0/X>
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Values or range of values
1...7200
Default: 120
command.
Configuration Manual, 11/2014, C79000-G8976-C351-03