Commit Mode - Siemens SCALANCE W760 Configuration Manual

Network structures
6.1 WLAN
6.1.4.2

commit mode

Description
With this command, you specify when the modified WLAN settings become effective on the
device.
Requirement
You are in the WLAN Configuration mode.
The command prompt is as follows:
cli(config-wlan)#
Syntax
Call up the command with the following parameters:
commit mode { auto | manual }
The parameters have the following meaning:
Parameters
auto
manual
Result
The commit mode is specified.
Further notes
You show the settings for the commit mode with the
See also
show wlan device (Page 126)
commit wlan-settings (Page 139)
138
Description
Each change to the WLAN settings is automatically applied and is immediately effec-
tive.
The changes are accepted, but are still not active. The changes only take effect when
you confirm the changes with the "
commit wlan-settings
show wlan device
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
" command.
command.