Show Snmp Targetaddr; Show Snmp Targetparam - Siemens SCALANCE W760 Configuration Manual

Industrial wireless lan

Hide thumbs Also See for SCALANCE W760:

Table of Contents

Call the command without parameters:

show snmp notif

The configured SNMP notification types are displayed.

show snmp targetaddr

This command shows the configured SNMP target addresses.

You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is as follows:

Call the command without parameters:

show snmp targetaddr

The configured SNMP target addresses are displayed.

This command shows the configured SNMP target parameters.

You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is as follows:

SCALANCE W760/W720 to IEEE 802.11n Command Line Interface

Configuration Manual, 11/2014, C79000-G8976-C351-03

Network protocols

Scalance w720