Show Sntp Status; Show Sntp Unicast-Mode Status - Siemens SCALANCE W760 Configuration Manual

System time
5.3 SNTP client
Result
The current SNTP broadcast configuration is displayed.
5.3.2

show sntp status

Description
This command shows the settings of the Simple Network Time Protocol.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show sntp status
Result
The settings of SNTP are displayed.
5.3.3

show sntp unicast-mode status

Description
This command shows the current configuration of the unicast mode of SNTP.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show sntp unicast-mode status
110
or
cli#
or
cli#
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03