Wlan Security Ap-Radius-Authenticator Reauth-Mode - Siemens SCALANCE W760 Configuration Manual
Industrial wireless lan
Hide thumbs
Also See for SCALANCE W760:
- Configuration manual (464 pages) ,
- Operating instructions manual (50 pages) ,
- Operating instructions manual (51 pages)
Table of Contents
Advertisement
Syntax
Call up the command with the following parameters:
wlan security ap-radius-authenticator reauth-interval <s(60-43200)>
The parameter has the following meaning:
Parameters
s
Result
The lifetime is configured.
Further notes
You display the setting with the
You configure the local time management with the
reauht-mode
See also
wlan security ap-radius-authenticator reauth-mode (Page 371)
show wlan security ap-radius-authenticator (Access Point) (Page 361)
10.2.4.9
wlan security ap-radius-authenticator reauth-mode
Description
With this command, you specify who decides the time before the clients are forced to
reauthenticate.
Note
This command is available only in access point mode.
Requirement
You are in the WLAN Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-wlan)#
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
Description
Lifetime in seconds
show wlan security ap-radius-authenticator
command.
Security and authentication
Values or range of values
60 s ... 43200
Default: 3600
wlan security ap-radius-authenticator
10.2 WLAN
command.
371
Advertisement
Table of Contents
