Device Mode - Siemens SCALANCE W760 Configuration Manual

6.1.4.1

device mode

Description
With this command, you specify the mode of the device.
Requirement
You are in the WLAN Configuration mode.
The command prompt is as follows:
cli(config-wlan)#
Syntax
Call up the command with the following parameters:
device mode { ap | client }
The parameters have the following meaning:
Parameters
ap
client
Result
The mode of the device is specified.
Note
If you change the operating mode, the device needs to be restarted. Before the device
restarts, a prompt for confirmation is displayed. If you confirm the prompt, the device starts
automatically in the new operating mode.
Further notes
You display the settings for the mode with the
See also
show wlan device (Page 126)
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
Description
Mode: Access Point mode (default setting)
Mode: Client mode
show wlan device
Network structures
6.1 WLAN
command.
137