Show Ip Dns Name-Server; Show Ip Dns Statistics - Siemens SCALANCE W760 Configuration Manual
Industrial wireless lan
Hide thumbs
Also See for SCALANCE W760:
- Configuration manual (464 pages) ,
- Operating instructions manual (50 pages) ,
- Operating instructions manual (51 pages)
Table of Contents
Advertisement
7.1.1.7
show ip dns name-server
Description
This command shows information about the DNS servers configured on the device. The
table contains the index, the address type (e.g. IPv4) as well as the IP address and the
origin.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show ip dns name-server
Result
The table with the information about the DNS servers is displayed.
7.1.1.8
show ip dns statistics
Description
This command shows DNS statistics. It provides information about the type and number of
queries to the DNS server.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show ip dns statistics
Result
Information about the communication with the DNS server is displayed.
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
or
cli#
or
cli#
Network protocols
7.1 IPv4 protocol
263
Advertisement
Table of Contents
