Configuration
3.1 System
3.1.10.9
no shutdown
Description
With this command, you shut down an interface.
Requirement
You are in the Interface Configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call the command without parameters:
no shutdown
Result
The Interface is activated.
Further notes
You activate the interface with the
You can display the status of this function and other information with the
interfaces
64
command.
command.
shutdown complete
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
show