Wlan Dfs - Siemens SCALANCE W760 Configuration Manual

Network structures
6.1 WLAN
6.1.5.30

wlan dfs

Description
With this command, you enable the "DFS(802.11h)" function. If the access point discovers a
disruption on the current channel, for example due to a radar device, it automatically
switches to an alternative channel.
Requirement
● Frequency band 5 GHz is used.
In client mode, a mixed frequency band mode is possible (2.4 - 5 GHz).
You are in the Interface Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-if-wlan-0-X)#
Syntax
Call the command without parameter assignment:
wlan dfs
Result
The DFS function is enabled.
Further notes
You display the setting with the
You disable the function with the
See also
no wlan dfs (Page 169)
168
show wlan basic <wlan 0/X>
command (default setting).
no wlan dfs
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
command.