Show Ip Telnet - Siemens SCALANCE W760 Configuration Manual

The parameters have the following meaning:
Parameter
ip-address
mask
connected
static
Result
The routing table is displayed.
7.1.1.4

show ip telnet

Description
This command shows the admin status and the port number of the Telnet server.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show ip telnet
Result
The admin status and the port number of the Telnet server are displayed.
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
Description
shows the information for a specific IP address
defines an address range using the subnet mask
Shows the direct connections
Shows the static connections
or
cli#
Network protocols
7.1 IPv4 protocol
Range of values
enter a valid IP ad-
dress
/8, /16 or /24
-
-
261