ATTACHMENTS
5. Install the 3 bolts and nuts to secure the pivot plate
to the frame assembly (Fig. 046).
6. Torque the six pivot plate bolts to 210 + 21 ft-lbs.
(284.7 + 28.5 Nm) (Fig. 047).
10-14
Fig 046
PICT-8712
Fig 047
PICT-8717
Reassemble Auger Power Head
1. With the auger housing shaft facing up, use a
bearing driver or press to install bearing. The
bearing is seated when the surface is flush with the
auger housing (Fig. 048 and Fig. 049).
Rev. 001
Fig 048
CLR DSC-0136
Fig 049
CLR DSC-0138
TX 413 Service Manual