ATTACHMENTS
2. Remove the two nuts and bolts from the support
plates securing the boom to the trencher arm (Fig.
077).
3. Loosen the jam nut (counter clockwise) on the
adjustment bolt and turn the bolt out. Slide boom in
towards motor to provide enough slack to remove
chain from sprocket (Fig. 078).
10-22
Fig 077
CLR DSC-0232
Fig 078
CLR DSC-0231
4. First, remove the chain from the nose roller (Fig.
079).
Second, remove the chain from the trencher
sprocket (Fig. 080).
Rev. 001
Fig 079
CLR DSC-0234
Fig 080
CLR DSC-0235
TX 413 Service Manual