HYDRAULIC LIFT ASSEMBLY
14. Lubricate all articulated parts inside the
mechanical joystick area with synthetic base
grease grade NLGI2 (Fig. 395).
Figure 395
15. Install the rubber bellows over the base plate and
install the tie strap in the groove of the rubber
bellows (Fig. 396).
Figure 396
7-58
16. Install the lift/tilt handle (Fig. 397).
DSC-1434
Power Beyond Sleeve-Port
This sleeve seals off the return oil port and directs the
hydraulic oil to the auxiliary valve (Fig. 398).
DSC-1435
Rev. 000
Figure 397
DSC-1436
Figure 398
DSC-1437
TX 413 Service Manual