Toro Dingo TX 413 Service Manual page 178

6. Slide the left brake bar out of the frame (Fig.
506).
Figure 506
7. Remove the spring assembly and cable (Fig.
507).
Figure 507
TX 413 Service Manual
8. Clamp the right side cable bracket in a vise.
Using a tool to hook into the spring, pull back the
spring enough to reach the set screw in the tube
guide (Fig. 508).
DSC-1271
9. Loosen the set screw on tube guide. Carefully
compress the spring and slide the cable end from
the slot in the cable bracket and remove (Fig.
509).
DSC-1273
Rev. 000
DRIVE SYSTEM
Figure 508 DSC-1274
Figure 509 DSC-1276
8-25