Toro Dingo TX 413 Service Manual page 83

HYDRAULIC SYSTEM
4. Lubricate and install the back-up ring in the
groove of the seal (Fig. 177).
Figure 177
5. Install the thrust plate to the front cover (seals
facing the front cover).
NOTE: Match up the alignment marks on the
front cover and thrust plate (Fig. 178).
Figure 178
6-26
6. Lubricate and install the drive shaft and gear (Fig.
179).
DSC-1482
7. Lubricate and install the driven gear (Fig. 180).
DSC-1483
Rev. 000
Figure 179 DSC-1484
Figure 180 DSC-1486
TX 413 Service Manual