Toro Dingo TX 413 Service Manual page 80

5. Remove the rear cover (Fig. 165).
Figure 165
6. Remove seals from the body and thrust plate.
With a marker, mark the thrust plate in relation to
the pump body (Fig. 166).
Figure 166
TX 413 Service Manual
7. Lift the body from the thrust plate (Fig. 167).
DSC-1465
8. Remove and separate the rear thrust plate from
drive shaft and driven gear (Fig. 168).
DSC-1467
Rev. 000
HYDRAULIC SYSTEM
Figure 167 DSC-1468
Figure 168 DSC-1469
6-23