Toro Dingo TX 413 Service Manual page 41

ENGINE
10. Connect the wire terminals for the fuel shut off
valve (Fig. 057).
D D
C C
Figure 057
A - Green wire
B - Yellow wire
11. Connect fuel line and install the fuel line clamp
located at the fuel shut off valve (Fig. 058).
Figure 058
4-12
B B
A A
DSC-1100
C - Violet wire
D - Pink wire
DSC-1099
Rev. 000
12. Install the bolt and nut retaining the hose clamp
for the oil reservoir vent hose and the clamp
holding the fuel shut off valve and tighten (Fig.
059).
Figure 059
13. Install the two bolts and nuts, left side, holding
the fuel tank bracket to the frame and tighten
(Fig. 060).
Figure 060
14. Tighten the right side fuel tank bracket nuts and
bolts.
DSC-1098
DSC-1096
TX 413 Service Manual