5. Slide/remove the boom from the boom mount arm
(Fig. 081).
TX 413 Service Manual
Fig 081
CLR DSC-0236
ATTACHMENTS
Nose Roller Removal
1. Remove the screw, washer and pin assembly from
the nose roller (Fig. 082).
2. Slide the nose roller out of the boom. Remove the
roller caps from each side of the roller. Remove the
slotted spacers from each side of the nose roller
(Fig. 083).
Rev. 001
Fig 082
CLR DSC-0238
Fig 083
CLR DSC-0239
10-23