Toro Dingo TX 413 Service Manual page 85

HYDRAULIC SYSTEM
13. Install the four bolts and washers. Tighten the
bolts on a criss-cross pattern; torque to 33 ft-lbs.
(45 Nm) (Fig. 185).
Figure 185
Wheel Motors
Wheel motor removal and replacement is covered in
the Drive System section of this manual, page 8-16.
For wheel motor service, refer to the Parker-Ross TF
wheel motor service manual (Toro P/N 492-4753).
6-28
DSC-1493
Rev. 000 TX 413 Service Manual