Toro Dingo TX 413 Service Manual page 99

HYDRAULIC LIFT ASSEMBLY
2. Install the two retaining bolts and nuts holding the
auxiliary valve to the frame (Fig. 216).
Figure 216
3. (Fig. 217, Ref. 3) Install the hydraulic return line
to the auxiliary valve.
Figure 217
7-10
4. (Fig. 218, Ref. 2) Install the hydraulic line from
the loader valve to the auxiliary valve.
DSC-0948
5. (Fig. 219, Ref. 1) Install the lower hydraulic hose
to the fitting on the auxiliary valve.
DSC-0946
Rev. 000
Figure 218 DSC-0945
Figure 219 DSC-0944
TX 413 Service Manual