Toro Dingo TX 413 Service Manual page 212

2. Install one of the pivot plates and 3 bolts and nuts to
the frame assembly (Fig. 042 and Fig. 043).
TX 413 Service Manual
Fig 042 PICT-8704
Fig 043 PICT-8703
ATTACHMENTS
3. Insert the auger housing into the previously installed
pivot plate (Fig. 044).
4. Insert the other pivot plate on the auger housing
(Fig. 045).
Rev. 001
Fig 044 PICT-8709
Fig 045
PICT-8710
10-13