Toro Dingo TX 413 Service Manual page 134

9. Spread the Wear Ring into a "C" shape only
enough to fit over the outside of the piston and
snap it into its groove (Fig. 344).
Figure 344
10. Install tape around the threads on the rod and
install the PRS Static O-ring onto the rod and
remove tape (Fig. 345).
Figure 345
TX 413 Service Manual
11. Lubricate the ID of the head and install on the rod
(Fig. 346).
DSC-1360
12. Lubricate the ID of the piston and install on the
rod (Fig. 347).
DSC-1361
Rev. 000
HYDRAULIC LIFT ASSEMBLY
Figure 346
Figure 347
DSC-1362
DSC-1363
7-45