Toro Dingo TX 413 Service Manual page 181

DRIVE SYSTEM
4. Install bolt and nut through the right side cable
bracket and the bar bracket (Fig. 518).
Figure 518
5. Tighten the bolt and nut on the right and left
cable brackets (Fig. 519).
Figure 519
8-28
6. Install the brake cable through the bracket on the
left side of the frame (Fig. 520).
DSC-1289
7. Attach the brake cable with a bolt and nut to the
brake shaft assembly (Fig. 521).
DSC-1290
Rev. 000
Figure 520 DSC-1291
Figure 521 DSC-1265
TX 413 Service Manual