Toro Dingo TX 413 Service Manual page 227

ATTACHMENTS
6. Remove the roller bearing from the trencher shaft
(Fig. 100).
7. From the sprocket side of the trencher boom mount,
remove the trencher shaft (Fig. 101).
10-28
Fig 100 CLR DSC-0303
Fig 101 CLR DSC-0305
8. If the motor side bearing needs replacement pro-
ceed as follows. Remove boom mount from mount
assembly (Fig. 102).
9. Block the boom mount on a press so the spacer and
shaft seal will press out freely (Fig. 103).
Rev. 001
Fig 102 CLR DSC-0353
Fig 103 CLR DSC-0310
TX 413 Service Manual