•
Secure the loader arm valve with the loader valve lock
anytime you need to stop the machine with the loader
arms raised.
•
Keep nuts and bolts tight. Keep equipment in good
condition.
•
Never tamper with safety devices.
•
Keep the traction unit free of grass, leaves, or other debris
build-up. Clean up oil or fuel spillage. Allow the traction
unit to cool before storing.
•
Use extra care when handling fuels. They are flammable
and vapors are explosive.
– Use only an approved container.
– Never remove the fuel cap or add fuel when the
engine is running. Allow the engine to cool before
refueling. Do not smoke near flammable substances.
– Never refuel the traction unit indoors.
– Never store the traction unit or fuel container inside
where there is an open flame, such as near a water
heater or furnace.
– Never fill a container while it is inside a vehicle, trunk,
pick-up bed, or any surface other than the ground.
– Keep container nozzle in contact with the tank during
filling.
•
Stop and inspect the equipment if you strike an object.
Make any necessary repairs before restarting.
•
Use only genuine Toro replacement parts to ensure that
original standards are maintained.
•
Battery acid is poisonous and can cause burns. Avoid
contact with skin, eyes, and clothing. Protect your face,
eyes, and clothing when working with a battery.
•
Battery gases can explode. Keep cigarettes, sparks and
flames away from the battery.
•
Keep your body and hands away from pin hole leaks
or nozzles that eject high pressure hydraulic fluid. Use
cardboard or paper to find hydraulic leaks; never use
your hands. Hydraulic fluid escaping under pressure can
penetrate skin and cause injury requiring surgery within a
few hours by a qualified surgeon or gangrene may result.
Sound Pressure Level
This unit has a sound pressure level at the operator's ear of 93
dBA, which includes an Uncertainty Value (K) of 1 dBA.
Sound pressure level was determined according to the
procedures outlined in EN 11201.
Sound Power
This unit has a guaranteed sound power level of 101 dBA,
which includes an Uncertainty Value (K) of 1 dBA.
The sound power level was determined according to the
procedures outlined in ISO 6395.
Vibration Level
Measured vibration level for right hand = 1.5 m/s
Measured vibration level for left hand = 1.3 m/s
Uncertainty Value (K) = 0.8 m/s
Measured values were determined according to the procedures
outlined in EN ISO 20643.
6
2
2
2