3. (Fig. 197, Ref. H) Install the hydraulic drain
line from the T-fitting on the oil filter base to the
hydraulic lift valve and tighten.
Figure 197
4. (Fig. 198, Ref. E) Install the hydraulic hose from
the gear pump to the hydraulic lift valve and
tighten.
Figure 198
TX 413 Service Manual
5. (Fig. 199, Ref. D) Install the hydraulic hose to the
fitting on the hydraulic lift valve and tighten.
DSC-0933
6. (Fig. 200, Ref. C) Install the hydraulic hose to the
fitting on the hydraulic lift valve and tighten.
DSC-0932
Rev. 000
HYDRAULIC LIFT ASSEMBLY
Figure 199
Figure 200
DSC-0929
DSC-0928
7-5