Auger Reassembly
Reassemble in reverse order.
Auger Tooth and Fishtail Shank
Removal
1. While lowering the arms, drive slowly backwards
until the auger assembly is horizontal (Fig. 005).
TX 413 Service Manual
Fig 005
CLR DSC-0213
ATTACHMENTS
2. Stop the engine.
3. Remove teeth from auger bit by loosening nuts on
the carriage bolts enough for the teeth to slide out
(Fig. 006).
Repeat on other lock nuts that hold gauge and
wisdom teeth (Fig. 007).
Rev. 001
Fig 006
CLR DSC-0221
Fig 007
CLR DSC-0222
10-3