Toro Dingo TX 413 Service Manual page 103

HYDRAULIC LIFT ASSEMBLY
6. Place an oil drain pan under the control valve
hoses (Fig. 231, Ref. D). Remove the hydraulic
hose from the fitting on the lift valve.
Figure 231
Note: Use paint or other marking method to
mark both ends of one hose and its valve
and cylinder fitting (Fig. 232 and Fig. 233).
Figure 232
7-14
Note: It may help to remove the "Line D"
DSC-0970
hydraulic valve fitting before attempting to
remove the next hydraulic hose.
7. (Fig. 234, Ref. C) Remove the hydraulic hose
from the hydraulic fitting on the lift valve.
DSC-0972
Rev. 000
Figure 233 DSC-0973
Figure 234 DSC-0971
TX 413 Service Manual