6. Connect the plug and jack connection to the
alternator wires to the rectifier (Fig. 053).
Figure 053
7. Connect the magneto wire, black to white wire
(Fig. 054).
Figure 054
TX 413 Service Manual
8. Install the fuel tank and tank bracket on the frame
(Fig. 055).
DSC-1105
9. Install two bolts and nuts located on the right side
of the tank bracket and leave loose (Fig. 056).
DSC-1103
Rev. 000
ENGINE
Figure 055
DSC-1102
Figure 056
DSC-1128
4-11