Toro Dingo TX 413 Service Manual page 203

ATTACHMENTS
4. Remove the screw and lock nut securing the fishtail
shank to the auger bit (Fig. 008).
5. The fishtail shank can be difficult to remove because
it is being held in by dirt and debris – you may need
to pry the fishtail shank away from the auger bit (Fig.
009 and Fig. 010).
10-4
Fig 008 CLR DSC-0224
Fig 009 CLR DSC-0225
Fishtail Shank Reinstallation
1. Reinstall the fishtail shank and torque nut and bolt to
16 + 2 ft-lbs. (22 + 3 Nm) (Fig. 011).
Rev. 001
Fig 010 CLR DSC-0226
Fig 011 CLR DSC-0381
TX 413 Service Manual