Front Seat Belt Warning Alarm; Front Seat Belt Warning Alarm Wiring Diagram - Mazda 6 Facelift 2005 Training Manual

Accessories

Front Seat Belt Warning Alarm

•
Driver seat belt warning alarm operates with a single buckle switch like the seat belt
warning alarm from the previous Mazda6.
•
The seat belt warning light in the instrument cluster shows if the driver is not buckled
while ignition is on or engine runs. An additional warning tone sounds when vehicle
speed exceeds 20 km/h.
•
Driver seat belt warning alarm chime can be switched off using WDS.
•
A front passenger seat belt warning alarm was added to Mazda6 Facelift, using an
occupancy sensor to detect whether the front passenger seat is occupied or not and a
buckle switch to indicate the buckle situation.
•
The warning light in the instrument cluster shows if the passenger is not buckled when
vehicle speed is higher than 20 km/h. Then also the warning sound occurs.
•
Passenger seat belt warning alarm chime can be switched off using WDS.

Front Seat Belt Warning Alarm Wiring Diagram

1 Instrument cluster
Buckle switch (driver´s side)
2
09-86
Body & Accessories
Buckle switch (passenger´s side)
3
Occupancy sensor
4
Service Training Mazda6 Facelift
M6FL_09060