TRUNK LID ADJUSTMENT
1. Measure the gap and height between the front door and the body.
2. If not as specified, loosen the door hinge
installation bolts or the door lock striker
installation screws, and reposition the door.
Clearance
a: 2.54.5 mm {0.100.18 in}
b: -1.01.0 mm {-0.040.04 in}
c: 4.08.0 mm {0.160.31 in}
3. Tighten the bolts or screws.
End Of Sie
STAY DAMPER DISPOSAL
Note
• The gas in the stay damper is colorless, odorless, and non-toic.
1. Wear protective eye wear.
2. Lay the stay damper flat.
3. Saw through the stay damper body using a
hacksaw.
4. Allow the gas to escape from the stay damper.
5. Discard the stay damper.
End Of Sie
TRUNK LID
A6E772052610W03
A6E7720W005
A6E772052610W04
S
A6E7722W006
S41