Concluding Steps - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

15.11 Concluding steps

Perform the following procedures to complete the task:
Ê Close the front cover and reinstall the ID card as described in section
"Closing the server" on page
Ê Close the top cover as described in section
page 115.
Figure 635: Attaching the caution label
Ê Place the enclosed load warning sign on the left front edge of the top cover
as shown.
Ê Mount the support bracket and rack mounting rails in the rack as described
in the "Rack Mounting Kit - RMK-F2 Drop-In" Mounting Instructions.
I
The document is available online at
(http://jp.fujitsu.com/platform/server/primergy/manual/
market) or from the ServerView Suite DVD 2 supplied with your
PRIMERGY server. The printed poster is contained in the rack
mounting kit.
TX300 S7 / RX350 S7
Converting a tower server to a rack server
112.
Upgrade and Maintenance Manual
"Mounting the top cover" on
http://manuals.ts.fujitsu.com
for the Japanese
907