Figure 561: Mounting the front VGA connector
Ê Run the front VGA cable through the mounting bracket on the front panel
frame as shown (1).
Ê Secure the front VGA connector with two hexagon bolts (2, see close-up).
13.3.1.6 Reassembling the front panel module
Ê Mount the front panel module cover on the front panel frame as described in
section
"Mounting the front panel module cover" on page
13.3.1.7 Reinstalling the front panel module
Ê Reinstall the front panel module as described in section
panel module" on page
TX300 S7 / RX350 S7
771.
Upgrade and Maintenance Manual
Front panel and external connectors
769.
"Installing the front
801