Concluding Steps - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

System board and components
Figure 574: Removing the UFM board (B)
Ê The UFM spacer remains on the system board.

14.2.2.4 Concluding steps

Perform the following procedures to complete the task:
Ê Reinstall the air duct as described in section
on page 102.
Ê Close the side / top cover as described in section
on page 115 (rack server) or
server).
Ê When working on a rack-mounted server, secure it in the rack as described
in section "Sliding the server into the rack" on page
If the server has been completely removed from the rack for maintenance
purposes, reinstall and secure it in the rack as described in section
"Mounting the server in the rack" on page
826
"Mounting the side cover" on page 122
Upgrade and Maintenance Manual
"Installing the system air duct"
"Mounting the top cover"
132.
130.
TX300 S7 / RX350 S7
(tower