8X 3.5-Inch Hdds (2 Sas Backplanes); Mounting Order For 3.5-Inch Hdds; 8X 3.5-Inch Hdd Sas Backplane Cabling - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

7.3.3

8x 3.5-inch HDDs (2 SAS backplanes)

7.3.3.1

Mounting order for 3.5-inch HDDs

Figure 143: Mounting order with up to 8 3.5-inch HDDs (2 SAS backplanes)
7.3.3.2

8x 3.5-inch HDD SAS backplane cabling

I
Before connecting SAS cables to the controller, bend the cables as
needed in order to reduce strain on the controller. Bend the SAS cables
as close to their shrink tubes as possible.
SAS cabling
Cable
(T26139-)
SAS cable
Y3963-V101
SAS cable
Y3963-V103
TX300 S7 / RX350 S7
Cabling
from
list no.
Connector MLC 1 on
16 SAS controller 1 in
PCI slot 10
Connector MLC 2 on
17 SAS controller 1
PCI slot 10
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
to
SAS backplane 1
connector X1
SAS backplane 2
connector X1
Cabling
plan
16.2.9
16.2.9
261