Installing An Expansion Card - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

9.2.1.5

Installing an expansion card

Ê Remove the expansion card from its protective packaging.
I
For further instructions regarding controller settings, please refer to
the accompanying documentation.
Ê If applicable, attach the required slot bracket to the expansion card as
described in section
V
CAUTION!
In order to satisfy cooling requirements, ensure to use a perforated
full height slot bracket (C26192-Y35-C20).
Figure 264: Installing the expansion card
Ê Carefully insert the expansion card into the desired PCI slot and press down
firmly until it is fully seated in the slot.
I
For slot preferences, please refer to section
page 410.
TX300 S7 / RX350 S7
"Preparing the expansion card" on page
Upgrade and Maintenance Manual
Expansion cards and backup units
"Basic information" on
415.
421