Installing The Modular Lan Controller; Concluding Steps - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

Expansion cards and backup units
9.3.3.4

Installing the Modular LAN controller

Ê If applicable, install a slot bracket on the new Modular LAN controller as
described in section
Ê Install the new Modular LAN controller as described in section
Modular LAN controller" on page
Ê If applicable, reinstall SFP+ transceiver modules on the new Modular LAN
controller, as described in section
page 575.
9.3.3.5

Concluding steps

Perform the following procedures to complete the task:
Ê Reinstall the air duct as described in section
on page 102.
Ê Close the side / top cover as described in section
on page 115 (rack server) or
server).
Ê When working on a rack-mounted server, secure it in the rack as described
in section "Sliding the server into the rack" on page
If the server has been completely removed from the rack for maintenance
purposes, reinstall and secure it in the rack as described in section
"Mounting the server in the rack" on page
Ê Reconnect all external cables to the replaced expansion card.
Ê Reconnect the AC power cords to the power supply units and secure them
with PSU cable brackets as described in section
the mains" on page
Ê Enable the PCI slot of the replaced expansion card as described in section
"Enabling replaced components in the system BIOS" on page
Ê Inform the customer about changed WWN and MAC addresses. For further
information, refer to section
on page 166.
Ê After replacing a network controller in a server running Linux OS, update its
MAC address in the related NIC definition file as described in section
"Updating the NIC configuration file in a Linux environment" on page
454
"Preparing the Modular LAN controller" on page
434.
"Installing SFP+ transceiver modules" on
"Mounting the side cover" on page 122
133.
"Looking up changed MAC / WWN addresses"
Upgrade and Maintenance Manual
"Installing the system air duct"
"Mounting the top cover"
132.
130.
"Connecting the server to
TX300 S7 / RX350 S7
435.
"Installing the
(tower
160.
163.